پروگرامر و دیباگر STLINK-V3SET ORG

All features

Standalone probe with modular extensions

Self-powered through a USB connector (Micro-B)

USB 2.0 high-speed compatible interface

Direct firmware update support (DFU)

JTAG/Serial Wire Debug (SWD) specific features:

3 to 3.6 V application voltage support and 5 V tolerant inputs

Flat cables STDC14 to MIPI10/STDC14/MIPI20 (connectors with 1.27 mm pitch)

JTAG communication support

SWD and Serial Wire Viewer (SWV) communication support

SWIM‑specific features (only available with adapter board MB1440):

1.65 to 5.5 V application voltage support

SWIM header (2.54 mm pitch)

SWIM low-speed and high-speed modes support

Virtual COM port (VCP) specific features:

3 to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs

VCP frequency up to 15 MHz

Available on STDC14 debug connector (not available on MIPI10)

Multipath bridge USB to SPI/UART/I²C/CAN/GPIOs specific features:

3 to 3.6 V application voltage support and 5 V tolerant inputs

Signals available on adapter board only (MB1440)

Drag-and-drop flash programming of binary files

Two-color LEDs: communication and power