All features
Standalone probe with modular extensions
Self-powered through a USB connector (Micro-B)
USB 2.0 high-speed compatible interface
Direct firmware update support (DFU)
JTAG/Serial Wire Debug (SWD) specific features:
3 to 3.6 V application voltage support and 5 V tolerant inputs
Flat cables STDC14 to MIPI10/STDC14/MIPI20 (connectors with 1.27 mm pitch)
JTAG communication support
SWD and Serial Wire Viewer (SWV) communication support
SWIM‑specific features (only available with adapter board MB1440):
1.65 to 5.5 V application voltage support
SWIM header (2.54 mm pitch)
SWIM low-speed and high-speed modes support
Virtual COM port (VCP) specific features:
3 to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs
VCP frequency up to 15 MHz
Available on STDC14 debug connector (not available on MIPI10)
Multipath bridge USB to SPI/UART/I2C/CAN/GPIOs specific features:
3 to 3.6 V application voltage support and 5 V tolerant inputs
Signals available on adapter board only (MB1440)
Drag-and-drop flash programming of binary files
Two-color LEDs: communication and power
نقد و بررسیها
هنوز بررسیای ثبت نشده است.